|
Plan
in advance, free of later trouble
I、
Pressure：
1.
The higher pressure, the more power consumption. The
minimum pressure should be the pressure decreasing resulted
by the tubing dimension and length added with applied
pressure.
2.
Listing all the applied pressures of various equipment.
If there are too large pressure difference, the different
type compressors should be applied or using pressure
increasing equipment. It should not be used in low pressure
with large power expense.
II、
Field：
1.
Enough space with daylighting for operation and maintenance.
2.
Low temperature, less dust, clean air and good ventilation,
room temperature less than 40℃.
III、
Type:
1.
Calculating the real air capacity added 20% tolerance.
2.
Considering the energy consumption ration to save power,
i.e. real capacity (cubic meter/min) divided by practical
horsepower (HP), the larger value the more power saving.
IV、
Compressed air Quality and requirement：
There
is plenty of moisture
in the compressed air, which it is very harmful to the
precise instrument, Pneumatic tools, valve, meters and
pipelines. Because the moisture will be corrosive to
the equipment, blocking instrument, reducing quality,
damaging equipment, it is necessary to equipped with
compressed air purifying system.
|
